Roto Climber MK 1
The Roto Climber MK1 was designed and built specifically for the cleaning, visual inspection and wall thickness measurements on conductors, piles, risers and Caissons. It comes at a time when ageing offshore platforms are in constant need of maintenance to ensure maximum safety and reliability.
The lightweight, easy to assemble and simple device is structurally robust and easy to deploy in the dangerous ‘Splash Zone’ areas of oil and gas platforms, therefore eliminating the high risk faced by off-shore divers and other maintenance personnel when trying to maintain some of the most difficult locations to access.
Operational up to a depth of 200 meters below sea level and up to the platform deck.
Single/double Stoneage Barracuda nozzle or Caviblaster, delivering seawater up to a pressure of 3,000 bars and flows of up to 28 L per minute.
UVS 100RL equipped for an ultra-compact, high resolution colour camera solution.
Cygnus Dive Mk 2 Ultra Sonic Thickness Gauge for measuring wall thickness loss without removing coatings.
Optional corrosion assessment probe: Eddyfi Lyft pulsed eddy current single probe, changeable depending on wall thickness and coating properties.
Middle East and Asian Zone 2 compliant.
Roto Climber MK 1 Mini
Our smallest and most lightweight device for cleaning and inspecting smaller sizes of pipe.
Roto Climber MK 2
Built for a multitude of functions for the lifelong maintenance of an offshore conductor, risers, caisson or platform leg.
A patented robotic climber for the inspection and maintenance of offshore wind turbine towers.
Designed specifically for the inspection of pipelines on the seabed, with the ability to perform high specification Phased Array testing.